r04ds0040ej0700 rev.7.00 page 1 of 8 jan 10, 2014 data sheet rd3cyd08 igbt driver description the rd3cyd08 has two?input and gate in a 5 pin package. this product is suited as igbt driver ic for the strobe. features ? supplied on emboss taping for high-speed automatic mounting. ? supply voltage range : 2.0 to 3.6 v ? operating temperature range : ?40 to +85c ? high drive current i oh short = ?130 ma (typ) (@v cc = 3.3 v) ? low sink current i ol short = 45 ma (typ) (@v cc = 3.3 v) ? ordering information part name package type package code (previous code) package abbreviation taping abbreviation (quantity) rd3cyd08cme cmpak-5 pin ptsp0005zc?a (cmpak-5v) cm e (3,000 pcs/reel) rd3cyd08vse vson-5pin pusn0005ka?a (tnp-5dv) vs e (3,000 pcs/reel) outline and article indication ? rd3cyd08 marking = control code d 3 index band cmpak?5 r04ds0040ej0700 rev.7.00 jan 10, 2014
rd3cyd08 r04ds0040ej0700 rev.7.00 page 2 of 8 jan 10, 2014 outline and article indication ? rd3cyd08 marking = control code d 3 vson-5 pin arrangement (top view) 5 4 v cc 1 2 3 in b in a gnd out y logic diagram y a b function table inputs output y a b l l l h l l l h l h h h h : high level l : low level
rd3cyd08 r04ds0040ej0700 rev.7.00 page 3 of 8 jan 10, 2014 block diagram a input b input internal circuit y output absolute maximum ratings item symbol ratings unit test conditions supply voltage range v cc ?0.5 to 4.6 v input voltage range * 1 v i ?0.5 to v cc + 0.5 v output voltage range * 1, 2 v o ?0.5 to v cc + 0.5 v input clamp current i ik 50 ma v i < 0 or v i > v cc output clamp current i ok 50 ma v o < 0 or v o > v cc continuous output current i o ?200 ma v o = 0 100 v o = v cc continuous current through v cc or gnd i cc or i gnd 200 ma maximum power dissipation at ta = 25c (in still air) * 3 p t 200 mw storage temperature tstg ?65 to 150 c notes: the absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. the input and output voltage rati ngs may be exceeded if the input and output clamp-current ratings are observed. when over shoot / under shoot pulse widt h is under 10 ns, input and output voltage permit to ?1.5 v or v cc +1.5v. 2. this value is limited to 4.6 v maximum. 3. the maximum package power dissipation was calc ulated using a junction temperature of 150c. recommended operating conditions item symbol min max unit conditions supply voltage range v cc 2.0 3.6 v input voltage range v i 0 v cc v output voltage range v o 0 v cc v operating free-air temperature ta ?40 85 c note: unused or floating inputs must be held high or low.
rd3cyd08 r04ds0040ej0700 rev.7.00 page 4 of 8 jan 10, 2014 electrical characteristics ta = ?40 to 85c item symbol v cc (v) min typ max unit test condition input voltage v ih 2.5 1.7 ? ? v 3.0 to 3.6 2.0 ? ? v il 2.5 ? ? 0.7 3.0 to 3.6 ? ? 0.8 v h 2.5 ? 0.35 ? 3.3 ? 0.40 ? output current i oh short 2.5 ?55 ?75 ?95 ma v o = 0 v 3.3 ?100 ?130 ?160 i ol short 2.5 20 30 40 v o = v cc 3.3 30 45 60 input current i in 3.6 ? ? 5 a v in = 3.6 v or gnd quiescent supply current i cc 3.6 ? ? 10 a v in = v cc or gnd, i o = 0 input capacitance c in 3.3 ? 2.5 ? pf v in = v cc or gnd switching characteristics v cc = 2.5 v item symbol ta = ?40 to 85c unit test conditions from (input) to (output) min typ max propagation delay time t d(on) ? ? 65 ns c l = 6500 pf a or b y t d(off) ? ? 200 output rise time t r ? ? 700 output fall time t f ? ? 2000 v cc = 3.3 0.3 v item symbol ta = ?40 to 85c unit test conditions from (input) to (output) min typ max propagation delay time t d(on) ? ? 50 ns c l = 6500 pf a or b y t d(off) ? ? 160 output rise time t r ? ? 500 output fall time t f ? ? 1500
rd3cyd08 r04ds0040ej0700 rev.7.00 page 5 of 8 jan 10, 2014 test circuit pulse generator out z = 50 c l = 6500 pf input output v cc note: c l includes probe and jig capacitance. waveforms input 10% v ih v oh v ol gnd t r 50% 50% t f t d(on) t d(off) 90% 10% 90% output note: input waveform : duty cycle 50%
rd3cyd08 r04ds0040ej0700 rev.7.00 page 6 of 8 jan 10, 2014 application note (strobe circuit) igbt driver lineup type no. specification rd5cyd08 rd5cydt08 rd3cyd08 package cmpak-5 igbt lineup type no. specification package tssop-8 combination example system igbt igbt driver control ic 3.3 v rd5cyd08 rd5cydt08 3.3 v signal 5.0 v signal 3.3 v signal 5.0 v trigger trance xenon tube igbt luminescence circuit igbt driver control ic rd3cyd08 rd3cydt08 cmpak-5 vson-5 rd3cydt08 cmpak-5 rjp4002ans rjp4002asa rjp4003ans rjp4003asa tssop-8 vson-8 vson-8 rjp4003ans rjp4003asa rjp4002ans rjp4002asa v ces = 400v(max), i cp = 150a(max), 4v drive v ces = 400v(max), i cp = 150a(max), 2.5v drive v ces = 400v(max), i cp = 150a(max), 4v drive v ces = 400v(max), i cp = 150a(max), 2.5v drive v cc = 2.0 to 3.6v cmos lever input i oh (short) = -130ma(typ) @ v cc = 3.3v i ol (short) = 45ma(typ) @ v cc = 3.3v v cc = 2.0 to 3.6v cmos lever input i oh (short) = -130ma(typ) @ v cc = 3.3v i ol (short) = 45ma(typ) @ v cc = 3.3v v cc = 4.0 to 6.0v cmos lever input i oh (short) = -130ma(typ) @ v cc = 5.0v i ol (short) = 40ma(typ) @ v cc = 5.0v v cc = 4.0 to 6.0v ttl lever input i oh (short) = -130ma(typ) @ v cc = 5.0v i ol (short) = 40ma(typ) @ v cc = 5.0v
rd3cyd08 r04ds0040ej0700 rev.7.00 page 7 of 8 jan 10, 2014 package dimensions mass (typ) [g] 0.006 previous code renesas code ptsp0005zc-a cmpak-5 / cmpak-5v jeita package code sc-88a ? 2013 renesas electronics corporation. all rights reserved. dimensions in millimeters a a 1 a 2 a 3 b c d e e h e l l 1 l p x y q 0.8 0 0.8 ? 0.15 0.1 1.8 1.15 ? 1.8 0.3 0.1 0.2 ? ? ? min nom reference symbol max ? ? 0.9 0.25 0.22 0.13 2.0 1.25 0.65 2.1 ? ? ? ? ? 0.25 1.1 0.1 1.0 ? 0.3 0.15 2.2 1.35 ? 2.4 0.7 0.5 0.6 0.05 0.05 ? e a eh e l l 1 q c d b aa a 3 l p s a a 2 a 1 as m x s y b a-a section c
rd3cyd08 r04ds0040ej0700 rev.7.00 page 8 of 8 jan 10, 2014 1 e 1 3 54 d e b a h c l 1.0 0.1 0.1 () 0.1 () 0.30.2 0.15 a 1 1.3 1.1 1.55 1.6 1.55 0.12 0.5 e e l p x y 0.2 1.65 1.65 0.22 0.07 l 1 c 1 c z d b a e d b 1 h e a 2 0.6 1.2 1.6 reference symbol dimension in millimeters min nom max p-uson5-1.2x1.6-0.50 0.002g mass[typ.] tnp-5d/tnp-5dv pusn0005ka-a renesas code jeita package code previous code
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". t he recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you mus t check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance desig n. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactu re, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this do cument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or othe rwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by yo u or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesa s electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao rd., putuo district, shanghai, china tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2014 renesas electronics corporation. all rights reserved. colophon 3.0
|
